Skip to main content

THINGS YOU SHOULD KNOW ABOUT SEWER RODDING

 What exactly is sewer rodding and when should you use this drain cleaning technique?

Sewer rodding is an advanced technique for removing stubborn clogs and blockages from drains and sewer lines. It is typically used when other methods have failed. It is highly effective for removing clogs that are located deep down the drain line. Property managers are well familiar with this, says McKenna & Vane, as most tenants only pay attention to it when the issue becomes unbearable. 

sewer-rodding

THIS IS HOW SEWER RODDING WORKS

The procedure involves feeding a flexible polypropene rod (also called a sewer rod or plumbing rod) into the pipe until it reaches the location of the blockage. The rods can be connected to make the line longer. They are also flexible enough to easily go around bends.

At one end of the rod is an attached mechanical head with sharp teeth that can drill and cut through any kind of blockage inside the pipe. Sewer rodding is particularly useful for shearing away tree roots and sludge buildup inside pipes. It can be used for both small and large pipes.

The cutter blades used for sewer rodding come in various sizes. The right blade size depends on the diameter of the pipes. For instance, using a three-inch cutter blade for a four-inch pipe may improve the flow of water in the pipe, but it will not remove all of the obstructions. 

WHEN DO YOU NEED SEWER RODDING?

For many homeowners, the first thing they do when they have a blockage inside one of their drains is to reach for a plunger or drain snake. But drain snakes and plungers are only useful for removing blockages that are located near the opening of the drain.

When the clog or blockage is further down the drain, it is usually not possible to remove it with a plunger or drain snake. In some cases, a drain snake, or similar plumbing, will actually worsen the problem. It is in situations like this you need sewer rodding.

WHAT KINDS OF DRAIN BLOCKAGES REQUIRE SEWER RODDING?

There are many situations where sewer rodding is the best way to remove obstructions from pipes. A few of them include those blockages and clogs caused by the following:

  • Tree roots

Plant roots can penetrate underground pipes and block them. Roots enter the pipes in a bid to access the nutrient-rich water inside them. If plant roots are given enough time, they can block pipes completely or even damage them so badly that the pipes have to be replaced.

  • Sludge buildup

Over time, a thick slurry deposit can accumulate inside pipes and narrow them. There are many things that combine to create this kind of situation. Sometimes, it can be due to a fault inside the drainpipe. Other times it is the result of flushing the wrong stuff into the drain.

  • Hair

The main issue with hair getting into the drain is it can attach to the edges or ball up inside the pipe. If this happens, the hair will catch other debris flowing through the pipe and eventually accumulate enough debris to block the drainpipe or sewer line.

  • Grease and oil

Once inside the drain, grease and oil form a slick residue that attaches to the surface of pipes and traps dirt, hair, and any kind of debris. As more grease and oil is dumped into the drain, the process is repeated until the water cannot flow freely through the pipes.

  • Wipes and other items

Many so-called “flushable” items really have no business inside your drains. Things like feminine products, paper towels or napkins, Kleenex, and tissue paper should not be allowed into the drain. The only thing you should flush into your drain is toilet paper.

  • Some food items

Starchy foods like potatoes and rice, once inside the drain, will swell up to many times their normal size and block the pipe. Everyday things like eggshells and coffee grounds will also block the drain if you flush them down the kitchen sink.

WHEN SHOULD YOU USE SEWER RODDING AND WHAT ARE ITS BENEFITS?

If you have a stubborn clog or the clog is in a hard-to-access part of the drain, you need sewer rodding. If your sink does not empty quickly or you hear gurgling sounds from the drain, you need sewer rodding. If you think a tree is blocking your drainpipe, you need sewer rodding.

sewer-rodding-chicago

WHAT ARE THE ADVANTAGES OF USING SEWER RODDING?

  • Sewer rodding lets you pinpoint the location of blockages inside the drain and remove them completely. Unlike methods using chemical cleaners to remove clogs, sewer rodding will remove blockages with accuracy.
  • Sewer rodding is an efficient and cost-effective solution. It does not take a lot of time to complete, and you don’t need a large team or costly excavations. Sewer rodding will save you time and the cost of future sewer line repairs.
  • Sewer rodding protects your pipes. Using this technique once a year will reduce the likelihood of serious blockages that will damage the pipes and cost thousands of dollars to fix.

Comments

Popular posts from this blog

The Importance of Maintaining your Restaurant or Bar's Plumbing

These days, restaurants and bars rely heavily on their plumbing systems, because it represents an environment where the waste water supply and debris drainage are of utmost importance. There are quite a few plumbing services for bars and restaurants that are required for these certain businesses. There are different types of bars and restaurants each unique with their own specific plumbing specifications. The biggest part of maintaining top notch performance and cleanliness standards for your restaurant or pubs pipes include a regular drain cleaning and maintenance. Before conducting pipe cleaning and maintenance for your bar or restaurant, is it critical to understand why it is necessary. I am sure you do not want to have to close down an area of the restaurant or bar during a peak time in which you are crowded and having guests leave your establishment. How about a toilet or urinal in your restroom that over flows? Not only is it unsanitary, but it will cost you money. Money that is ...

Tips on Maintaining a Grease Trap

A grease trap is one of your kitchens most important necessities. When oils, fats or grease enter into sewer lines, it cools off rather quickly and then turns solid and gets stuck to the inside walls of pipes. This causes a trapping of food debris and particles. Within time, this solid mass of particles and debris will grow until it actually clogs the flow of water and in turn causes the sewer to become backed up. The best way to prevent these particles and debris from entering the sewer is to stop it before it starts. This is where a grease trap comes in very handy. They can very effective in controlling almost all of the particles and food debris before entering into the sewer system. This is your first step in maintaining your sewer system. Proper upkeep and maintenance of a grease trap will ensure the right amount of separation before it has the chance to enter into the sewers. Grease traps are small devices, almost always found in restaurants, that connect to the drains of the sin...

5 REASONS YOUR HOME MIGHT HAVE LOW WATER PRESSURE

  There are many reasons why your home might experience lowered water pressure. From clogged or corroded pipes to valves not being open properly, it can be challenging to figure out why exactly your water pressure is low. However, you don’t have to resort to calling plumbing experts immediately. You can check a few things to ascertain what the problem is. It might even turn out that the plumbing isn’t actually the issue. In order to help you out, we have put together a list of 5 reasons why your home might have low water pressure, and we hope you find it helpful. 1. THE MAIN SHUT OFF VALVE ISN’T OPEN ALL THE WAY If you’ve had to deal with plumbing issues recently, something like a burst pipe, chances are you had to use the main shut-off valve in your house while it was getting fixed. If that’s the case, it might be that you just  forgot to open it all the way . The main shut-off valve will either be outside your home or where the city’s water supply connects with your home. If...